Gate Mount Pool Alarm - 7 Second Delay - Closed Loop
The new GRI Gate Mount Pool Alarm was designed as an aid for prevention of unattended access to a pool/spa area by a small child. Monitoring all gates with Closed Loop magnetic reed switches, the Gate Mount Pool Alarm will sound an alarm should anyone too small to manage the adult pass thru feature attempt access to the pool/spa area. For maximum protection all movable openings should be protected in such a manner by the Gate Mount Pool Alarm.
The GT10-2 and GT10-4 can be operated independently with an on-board 9 volt battery or with a 12 volt externally supplied DC power source. Both power sources have been designed to maintain a maximum sound pressure level of 85db at 10. Estimated battery life is approximately 180 days based on no alarm soundings during that time lapse. Should the battery voltage drop below 7 volts, a low battery mode will be initiated and the unit will sound 3 beeps approximately every 30 minutes for one to two weeks prior to total battery failure. Battery must be replaced at this time, and the cause of power failure determined and restored.
NOTE: Unit will function at minimum 5VDC at a very limited sounder volume. This power level is considered total battery failure.
Cleaning: Periodic cleaning of sounder and box are required to maintain sound level.
Caution: To prevent a memory failure or circuit damage, external power source not to exceed 15 VDC.
Warning: Environmental conditions, such as wind, may affect the sound level.
GT10-2 Gate Mount Pool Alarm - 7 Second Delay - Closed Loop
GT10-4 Gate Mount Pool Alarm - Instant On - Closed Loop