Honeywell 5806W3 Wireless Smoke Detector

 

 

 

 

 

 

Replacement for Honeywell 5806 Wireless Smoke Detector

 

Honeywell’s 5806W3 is a 3V battery operated, photo electronic smoke detector with a built-in wireless transmitter. It facilitates fire verification for false alarm reduction requirements by ANSI/SIA CP-01standards and is intended for use with any of Honeywell’s 5800 Series wireless receiver/transceivers for residential installations. The 5881ENHC or 5883H receivers are required for commercial installations.

 

The transmitter can send alarm, tamper, maintenance (when control panels are equipped to process maintenance signals) and battery condition messages to the system’s receiver. The maintenance signal fully complies with the sensitivity test requirement specified in NFPA 72, 7-2.2 and is UL approved.

 

The 5806W3 incorporates a state-of-the-art optical sensing chamber and advanced microprocessor. The microprocessor allows the detector to automatically maintain proper operation at factory calibrated detection levels, even when sensitivity is altered due to the presence of contaminants settling into the unit’s smoke chamber. A removable detector cover and chamber top allows you  to quickly and easily clean the detector chamber without disassembling the detector head.

 

The 5806W3 is an ideal smoke detector for difficult to wire locations, applications where room aesthetics are critical or where hazardous materials exist.

 

Features:
  • Smoothing Algorithms
    Mathematical calculations in the detector’s software that minimize nuisance alarms by smoothing out short term spikes from dust and smoke.
  • Smart Check
    A signal is sent to the control panel when the detector requires cleaning. This allows a regular, non-emergency service call to clean the detector before it goes into alarm.
  • Drift Compensation
    Virtually eliminates nuisance alarms from long-term dust build-up by automatically adjusting the detector’s sensitivity.
  • Removable Detector Cover and Chamber Top
    Provides  the ability to quickly and easily clean the detector chamber without disassembling the detector head.
  • Approved UL Listings for Residential and Commercial Applications
    Both residential and commercial installation requirements are met.
  • Additional LED Status Indicators
    Identifying between alarm or trouble conditions is easier with green and red LED status indicators. The green LED denotes a normal condition while the red LED indicates an abnormal condition.
  • Easy-to-install Mounting Base
    The sturdy mounting base allows the detector to be more easily installed on uneven surfaces (i.e. stucco). The mounting base has larger mounting ports to accommodate drywall anchors for easy surface mounting.
  • Improved Robust RF Field Strength
    The distance between the detector and receiver has been significantly increased.
 
 
  • Utilizes one long-life 3V lithium battery
  • Micro controller runs on an 4.0 MHz clock
  • Horn operates at 3.3 KHz with sound pressure level of 85dBA at 10 feet
  • Built-in wireless transmitter, temporal code 3 sounder
  • Model: Honeywell 5806W3
  • 63 Units in Stock
  • Manufactured by: Ademco/Honeywell

Ask a Question

$89.95

Add to Cart:
Your IP Address is: 3.235.172.123
Copyright © 2024 AlarmSuperStore.com. Powered by Zen Cart
Parse Time: n/a - Number of Queries: 107 - Query Time: 0