Special Order
This ingenious device protects both freestanding or cabinet-mounted fire extinguishers and other equipment.
Here
is an inexpensive yet highly effective way to protect fire
extinguishers and a wide range of other fire fighting equipment from
theft. The device is compact, highly effective, and extremely
versatile. It does not interfere with fire fighting in any way. Also,
the simplicity of design contributes to its high degree of reliability.
How it works.
For cabinets housing a fire extinguisher, fire hoses, sprinkler
shutoff valves, guns, medicine,
etc. Mini Theft Stopper is mounted next to the door or in the cabinet
and its reed switch unit is mounted on the door jam. The matching
magnet
is mounted on the door near it and when the door is opened, the device
sounds a 105 dB warning
horn.
For a freestanding fire extinguisher
or other freestanding equipment, Mini Theft Stopper comes with a special
clip that can be used in several ways. An extinguisher's pull pin may
be routed through the holes in both prongs of the clip. The clip is
then held in
place by the extinguisher's seal and when the seal is broken to use the
extinguisher, the alarm sounds. The steel clip can also be placed under
any type of equipment. When lifted, the clip opens and the alarm
sounds immediately.
STI-6255 FEATURES
- Highly visible "stop sign" design
discourages wrongful use of extinguisher.
- Sounds a powerful 105 dB warning horn
when activated, drawing attention in a hurry.
- Tough, ABS construction.
- Two methods
of operation--reed switch activation for cabinets
and display cases and unique clip activation
for fire extinguisher pins and other freestanding
equipment.
- Deactivation pin provided for
service by authorized personnel.
- Does not
interfere with use of protected fire fighting
equipment.
- 9 VDC alkaline battery is
included.
- Compact design 3.37 in. (83mm) in
diameter and 1 in. (25mm) deep.
- Mounts easily
next to extinguisher or in cabinet.
- Three
minute automatic reset upon activation.
-
Extremely cost-effective and easy to install.
- Recommended operations range 32°F to 120°F (0°C to 49°C).
-
One year guarantee against breakage of
ABS housing and on the electronic
components.
Note: End user must verify the alarm and battery function every six months and replace battery annually or as required by state law