Honeywell GSMVLP5-4G Internal GSM Communictor for L5100

Honeywell is focused on providing the best alarm communication solutions for the security industry. Alternative communication methods are critical in the marketplace due to VoIP, migration from POTS and global growth of digital networks.

Transmission Protocols
Honeywell's IntelliPath™ Series communicators provide seamless, reliable coverage by automatically choosing the best signal in the area (whether 2G, 3G or 4G) and self-adjusting as necessary. The following wireless communication protocols are supported:
HSPA+ (4G )
HSPA (HSDPA & HSUPA) (3G)
EDGE (2G)
GPRS (2G)

This groundbreaking communications solution offers full data reporting and uploading/downloading with most Honeywell control panels. In addition, with onboard zone inputs and optional dialer capture capability, we’re compatible with other manufacturers’ security panels as well. Honeywell communication products and control panels combine to make installations faster and easier.

All signals are delivered to Honeywell’s AlarmNet® Network Control Center, which routes the information to the appropriate central station. The state-of-the-art AlarmNet Network Control Center is fully redundant and monitored 24/7. AlarmNet has the ability to route messages using AlarmNet-i and 800 PLUS services, providing true redundancy and multi-path message delivery.

• Multi-GSM platform compability —2G, 3G and 4G
• Automatic selection of the best available GSM network
• 4G capable using HSPA+ protocol
• Full Contact ID or ADEMCO® High-Speed Reporting
  Contact ID reporting using ECP mode with compatible Honeywell control panels or combined with optional dialer capture for non-ECP capable control panels.
• 256-bit AES Encryption
  Advanced encryption standard used for secure communications.
• Upload/Download
  Available with select Honeywell control panels. Requires Compass version 1.5.8.54a or higher.
• Integration
  Quick and easy installation of GSM for VISTA® and LYNX controls.
• Dynamic Signaling with Certain Honeywell Control Panels
  Provides management of control panel dialer and digital cellular communicator. Programmable priority and delays determine signal path.
• Diagnostic LEDs
  Provide signal strength and status indications.
• QOS
  Quality of Service diagnostics via AlarmNet supply vital information including when a message was received, battery voltage, input voltage, signal strength and message path.
• Web-Based Programming
  Allows complete interactive programming from AlarmNet Direct.
• Intelligent Supervision
  Any message generated serves as a supervision message per optional 24 hour or 30 day intervals. This feature effectively limits required messages to be sent.
• Remote Services Capability*
  Optional Honeywell Total ConnectTM Remote Services value-added web-based or SMS system control as well as e-mail notification of system events.
• Six Input Zones
  Digital processing for improved detection and false alarm protection
• Tamper Protected Enclosure
  Built-in tamper sends a report when a tamper condition is detected and a restore when cleared.
• Built-in Power Supply
  Onboard charging circuit design accommodates back-up battery. Includes primary power and battery supervision.
• Back-Up Battery
  6V 3.1Ah supplied to deliver up to 24 hours of standby operation.

*Service subscription required.