Aiphone GF-OP3 Postal Lock Panel







GFOP3 Postal Lock Panel
Discontinued No Replacement



The GF-OP2 and GF-OP3 Postal Lock Panels are for use with a GF/GH Multi-tenant entry system, and allow the postal lock device to be mounted alongside the entry panel. The lock device is available from the post office, and mounts behind the panel accessible via the keyhole opening. The timer relay can be adjusted to provide a contact closure from 5 to 20 seconds. NOTE: The GF-OP3 panel is a 3-module frame with one open module position. Include a module, address panel or blank panel to fill this open position


Installation:



1. Install alongside the GF/GH Entrance Panel.
2. When using GF-OP3, install an additional module in the top module opening of the unit.
2. Secure wire connections as shown on wiring diagram.
3. Cut the unused contact wire so the bare wires are not exposed.
4. When mounting with a rain hood (GF-nH) or surface box with hood (GF-nHB), you must grind out the bottom lip of hood/box for the lock to fit.


Specs:

Power Source: 24V DC

Mounting:
Flush mounted, or surface mounted with GF-102HB for GF-OP2, GF-103HB for GF-OP3.

Terminations:
Color-coded prewired pigtails

Relay Input:
24V DC, Red, Black wires, 22AWG

Relay Output:
Brown (COM), Orange (N/O), Yellow (N/C) wires

N/O Output rating:
5A at 30V DC, 10A at 125V AC, 3A at 250V AC

N/C Output rating:
3A at 30V DC or 125V AC

Wiring:
2 conductors from 24V DC power supply to GF-OP panel, 2 conductors from GF-OP panel to strike, with power for strike wired in series.

Dimensions:
GF-OP2: 8-7/8" x 5-5/16" x 2"
GF-0P3: 12-5/8" x 5-5/16" x 2"
 

  • Model: Aiphone GF-OP3
  • 0 Units in Stock
  • Manufactured by: Aiphone

Ask a Question

Add to Cart:
Your IP Address is: 44.201.97.224
Copyright © 2024 AlarmSuperStore.com. Powered by Zen Cart
Parse Time: n/a - Number of Queries: 92 - Query Time: 0