Visonic MCT-302 Wireless Door Window Contact Transmitter

 

 

 

 

 

 

 

 

PowerCode Wireless Magnetic Contact
SPECIAL ORDER

MCT-302 is a fully supervised PowerCode magnetic contact transmitter, designed primarily for protecting doors and windows using a built-in magnetic contact that operates in conjunction with a magnet to detect the opening and closure of a door or window. This highly reliable top-performance wireless device is easy to install and operate in a wide range of residential and commercial environments.

 

An additional hard-wired, end-of-line (EOL) protected input can be used, with normally open (NO) and normally closed (NC) pushbuttons, sensors, contacts, switches and other detection devices, for a variety of security and control applications. 
 

When activated, the magnetic contact and the auxiliary input initiate an individual 24-bit PowerCode ID message, which identifies it to the target receiver as a separate transmitter. Each ID code is randomly selected from 16 million possible combinations, and is therefore unique and virtually impossible to accidentally reproduce.

A smart anti-collision algorithm prevents signal jamming by simultaneous transmission from multiple devices. Periodic transmission of supervision signals is used to confirm system connectivity at all times.

These unique top quality devices are available in several optional frequencies in compliance with European, U.S. and other international standards. Each transmitter is powered by a standard long-life lithium battery, which is constantly monitored, with automatic reporting to the receiver when the battery needs to be replaced.

 

MCT-302  Features:

  • Magnetic contact and auxiliary input for external devices
  • User-selectable operation of auxiliary input as NC or EOL (end-of-line loop with NC or NO sensors)
  • Superior transmission range
  • Fully supervised
  • PowerCode ID factory-selected from 16 million possible combinations
  • Smart anti-collision mechanism supports multiple simultaneous transmissions
  • Long-life standard lithium battery included
  • Low-battery signaling
  • Available in several optional frequencies in compliance with international standards
  • Compatible with PowerMax and all Visonic PowerCode wireless panels and receivers.

Specs:




Transmitter ID Code 24-bit digital word - 16 million combinations
Overall Message Length 36 bits
Alarm inputs Built-in magnetic reed, plus 1 auxiliary input
Input circuit NC/EOL selectable
Message Repetition Every 3 minutes, or one shot - selectable
Supervision Automatic status report at 1-hour intervals
Power Source 3 V lithium battery ( Use CR-123A )
Nominal Battery Capacity 1.2 Ah
Battery Supervision Battery condition data transmitted as part of hourly status report
Compliance with standards Meets FCC Part 15, ETS 300-220 and MPT1349
Operating Temperature 0°C to 49°C (32°F to 120°F)

 

  • Model: Visonic MCT302
  • 0 Units in Stock
  • Manufactured by: Visonic

Ask a Question

$69.95

Add to Cart:
Your IP Address is: 44.201.97.224
Copyright © 2024 AlarmSuperStore.com. Powered by Zen Cart
Parse Time: n/a - Number of Queries: 91 - Query Time: 0