Manufacturers

More Information

Sponsors

(image for) Free shipping over $199

Firelite MS-9200UDLS 198 Point Addressable Panel

  • Model: Firelite MS9200UDLS
  • 0 Units in Stock
  • Manufactured by: Firelite

(image for) Ask a Question

Add to Cart:

 

 

 

 

 

 

 

 

198 Point Addressable Panel

DISCONTINUED USE ES-200X AS A REPLACEMENT
 

MS-9200UDLS Rev 2: 198-point addressable Fire Alarm Control Panel, one SLC loop. Includes 80-character LCD display, single printed circuit board mounted on chassis, and cabinet. 120 VAC operation.


The FireLite MS-9200UDLS Rev 2 with Version 4.0 firmware is a combination  FACP (Fire Alarm Control Panel) and DACT (Digital Alarm Communicator /Transmitter) all on one circuit board. This compact intelligent addressable control panel has an extensive list of powerful features. While the MS-9200UDLS Rev 2 may be used with an SLC configured in the CLIP (Classic Loop Interface Protocol) mode, it can also operate in LiteSpeed™ mode—FireLite’s latest polling technology—for a quicker device response time. LiteSpeed’s patented technology polls 10 devices at a time. This improvement allows a fully-loaded panel with up to 198 devices to report an incident and activate the notification circuits in under 10 seconds. With Litespeed polling, devices can be wired on standard twisted, unshielded wire up to a distance of 10,000 feet.

The MS-9200UDLS Rev 2’s quick-remove chassis protects the electronics during  construction. The backbox can be installed allowing field wiring to be pulled. When construction is completed, the electronics can be quickly installed with just two bolts.

While shielded wire is not required, it is recommended that all SLC wiring be  twisted-pair to minimize the effects of electrical interference. Wire size should be no smaller than 18 AWG (0.78 mm²) and no larger than 12 AWG (3.1 mm²). The wire size depends on the length of the SLC circuit.
Your IP Address is: 18.97.14.86
Copyright © 2024 AlarmSuperStore.com. Powered by Zen Cart