M1 Wireless Receiver for GE Crystal Transmitters
The ELK-M1XRF2G is a Wireless (RF) Receiver and Input Expander for use with the ELK-M1 and ELK-M1EZ8 Controls. The receiver connects to the four (4) wire data (keypad) bus of the control and integrates in much the same way as a M1XIN hardware zone expander except that a single M1XRF can handle up to 144 wireless zones (e.g. transmitter sensors or points).
The major benefit of having multiple M1XRF2G receivers is that hundreds if not thousands of square feet can now be covered by strategically placing each receiver in a different geographic location.
The M1XRF2G receiver uses Crystal frequency technology and is a dual (2) antenna, phase diversity design capable of long range wireless coverage.
Only compatible with the 319.5MHz Crystal based transmitters available from GE.
Features:
• Adds up to 144 individual wireless zones (sensors/points)
• Operates from the 4 wire RS485 Data Bus
• Additional Receivers (up to 11) may be Connected to a single M1 or M1EZ8 Control for redundancy or greater coverage
• Flash Memory for Updating of operating Firmware
Specs:
• Sensitivity: >105 dbm
• Operating Temperature: 0 to +120 degrees F
• Operating Voltage: 12 Volts D.C.
• Current Draw: 70mA
• Range: 300 to 500 ft. line of sight
NOTE: Walls or metal may reduce actual operating range.
