X75 Two-Channel Amplifier (60/75W)The X75 is a 2-channel dual source power amplifier with autosource
switching. It features two audio line inputs with a loop out to another
zone, receiver, or device from Line 2 source. This amplifier can be used
for power upgrades in specific zones, for speaker selector or volume
control systems.
The X75 is a Class D amplifier rated at 75 watts
per channel into 4 ohms, and 60 watts into 8 ohms. With the
Stereo/Bridge Mono switch in Bridge Mono position, both amplifier
channels are combined for a higher powered mono output. In Bridge mode
the X75 is rated at 160 watts of power into a single 8 ohm load.
Features:
- Built for multi-speaker applications with volume controls
- Automatic switching between two sources with signal sensing
- Front panel volume and balance controls
- Channels are bridgeable to create one channel with 160 watts of power
Specs:| Shipping Dimensions | 20.0" (W) x 4.5" (H) x 10.5" (D)
(50.8 x 11.4 x 26.7 cm) |
| Shipping Weight | 11.5 lbs (5.2 kg) |
| Crosstalk | > 70dB @ 1 kHz |
| Frequency Response | 10Hz to 30kHz +0.0dB/ -3.0dB @ 8 ohms, 1 W |
| Input Sensitivity | 900mV for 50W at 8 ohms |
| Power Output | Continuous Stereo:
60W per channel at 8 ohms
75W per channel at 4 ohms
Bridged Mono:
160W bridged mono at 8 ohms |
| Power Requirement(s) | 120VAC 60Hz 4.2A |
| Signal to Noise Ratio | 100dB A-weighted |
