Manufacturers

More Information

Sponsors

(image for) Free shipping over $199

Russound R1250MC 6 Zone/12 Channel Multiroom Amplifier 50W

  • Model: Russound R1250MC
  • 0 Units in Stock
  • Manufactured by: Russound

(image for) Ask a Question

$1,159.95

Add to Cart:







6 Zone/12 Channel Multiroom Amplifier 50W
Special Order

The Russound R1250MC is a 12-channel power amplifier ideal for use as the main amplifier in home theater and distributed audio systems. The 12 channels are arranged in pairs to provide amplification for six stereo zones.


The R1250MC provides an array of useful features such as autosensing line inputs, bridged mono operation, independent zone triggering, bus inputs and multiple speaker outputs per zone to meet a wide variety of applications and configurations.


The R1250MC is rated at 50 watts per channel into 8 ohms and 80 watts per channel into 4 ohms. With a zone’s mode switch set in the Bridge Mono position, both channels in the zone are combined for a mono output of 140 watts into an 8-ohm load. All this power is supplied by three high-output toroidal transformers. Each amplifier output channel includes robust protection circuitry for safety and reliability under extreme circumstances.


Features:
  • Ideal for home theater and six-zone distributed audio systems
  • Zones are bridgeable to create flexible power configurations
  • Robust circuitry designed for stability under demanding loads
  • Installs with either attached feet or included rack ears
  • Autosensing line inputs activate amplifier zones upon detecting audio signals


Shipping Dimensions24.0" (W) x 13.0" (H) x 24.0" (D)
(61.0 x 33.0 x 61.0 cm)
Shipping Weight48.9 lbs (22.2 kg)
Amplifier Channels12
Frequency Response20 Hz to 20 kHz +/-0.3 dB
Fuse RatingUS/Canada: T15AL 250 V
Europe: T10AL 250 V
Input Impedance47 kilohms
Input Sensitivity70 mV for 1 W at 8 ohms
500 mV for 50 W at 8 ohms
Power OutputSingle Zone Maximum:
(0.1% THD+N; f=1 kHz)
50 W per channel, 2 channels at 8 ohms
80 W per channel, 2 channels at 4 ohms
140 W at 8 ohms, 2 channels bridged

All Zones Continuous:
35 W per channel, 12 channels at 8 ohms
50 W per channel, 12 channels at 4 ohms
100 W at 8 ohms, each zone bridged
Power Requirement(s)US/Canada: 120 VAC 60 Hz 7 A
Europe: 230 VAC 50 Hz 4 A
Signal to Noise Ratio>100 dB
Switching Delay0.5 to 4.5 minutes
Total Harmonic Distortion<0.05% THD+N from 20 Hz to 20 kHz
Trigger Input(s)12 VDC 10 kilohms
Trigger Output(s)12 VDC 100 mA
Voltage Gain32 dB
Zone Outputs6

Your IP Address is: 18.97.9.168
Copyright © 2025 AlarmSuperStore.com. Powered by Zen Cart