Home Water Leak Alarm SystemSpecial Order- Instant Alarm
- Signaling Device
- Self Contained
- Local Alarm and Flashing LED
- Low Battery Indicator
- 6’ Jacketed Lead
- Form C Relay
- Additional Sensors, PN WS-20-240-S (20’ jacketed lead, max. wire run
106 ft.) Up to 6 Sensors per unit
The WS-20 is designed as a signaling device for use as a self contained Home Water Leak Alarm System. The Model WS-20 will sound a local alarm and flash an LED indicator, should water come in contact with the WS-20 water sensor.
The Home Water Leak Alarm System uses a microprocessor to monitor a Water Sensor, a Cancel Button, Supply Voltage and provides control for a Sounder, LED indicator and a Form C Relay. The Water Alarm System is set to alarm the instant water is bridged across the two stainless steel wire straps on the water sensor. The sounder will continue to sound until the reset/cancel button is depressed. Other features for the WS-20 would include an adjustable sounder volume, power/alarm LED indicator, a latching relay and a low battery signal.
Specifications:Battery Type: 9 Volt Alkaline
Battery Life: Approximately 6 Months
Recommended External Power: 9 to 12 VDC @ 100 mA
Low Battery Mode: 6.5 VDC
Sounder Rated: 85 dB at 10 ft. (3.5 M)
Wire Run : 106’ Maximum
Relay ContactsNominal Switching Capacity: 2A 30 VDC
Max Switching Power: 60 Watts
Max Switching Current: 2 Amps
