The Next K9-85 MCW is a PowerCode wireless digital PIR detector designed to enable homeowners to secure their homes while allowing their pets to move freely anywhere in the house. Employing Visonic's patented "Target Specific Imaging" optical system (TSI) and unique pet identification software algorithm, the Next K9-85 has an unprecedented capacity to reliably distinguish between human bodies and pets weighing up to 38 kg (85lb).
Next K9-85 MCW is a fully supervised wireless detector with anti-collision PowerCode technology. It is compatible with PowerMax and all Visonic PowerCode wireless panels and receivers. Next K9-85 MCW implements a whole new generation of patented technologies including FM Digital Signal Processing (FM-DSP), "True "Motion Recognition" with Fuzzy Logic algorithm" (TMR), and state-of-the-art 3D cylindrical optics.
The result is the industry's best detection accuracy, false alarm immunity, and ultimate long term reliability in an attractive, easily installed wireless detector.
Features:
-
Pet-Tolerant for animals up to 38 kg (85 lb).
-
Fully supervised wireless detector with anti-collision PowerCode technology.
-
Compatible with PowerMax and all Visonic PowerCode wireless panels and receivers.
-
3 Volt long life high power standard Lithium battery.
-
Long-term stability and reliability thanks to advanced true digital FM processing.
-
Industry's best catch performance based on proprietary Target Specific Imaging and 3D cylindrical optics.
-
Ultimate false alarm immunity based on patented True Motion Recognition with exceptionally high sampling rates and "Event Verification" algorithm.
-
12m (40 ft) 90o multiple-curtain coverage with "wall" creep zone.
-
Fast and easy adjustment-free installation.
-
Attractive sleek design suitable for any home or office environment.
|
OPTICAL |
|
|
Detector Type |
Dual element low noise pyroelectric sensor. |
|
Lens Data |
No. of Curtain Beams: 9
Max. Coverage: 12 x 12 m (40 x 40 ft) / 90° |
|
Pet Immunity |
Up to 38 kg (85 lb). |
|
ELECTRICAL |
|
|
Internal Battery |
3V Lithium battery, type CR-123A.
For UL, use Panasonic or Sanyo only |
|
Nominal Battery Capacity |
1450 mA/h. |
|
Standby Current Drain |
approx. 0.025 mA. |
|
Transmit Current Drain |
20 mA (including LED). |
|
Battery Life (with LED on) |
Typically over 3 years. |
|
Battery Power Test |
Performed immediately upon battery insertion and periodically after every several hours. |
|
FUNCTIONAL |
|
|
True Motion Event Verification |
2 position selector - 1 (OFF) or 2 (ON) motion events. |
|
Alarm Period |
3 seconds. |
|
Visual Indications |
LED Lights for about 3 seconds upon transmission of alarm & tamper messages and upon motion detection in the walk test mode.
LED Flashes during the power-up stabilization period, or after restoring (pressing) the tamper switch.
LED Does not light upon transmission of supervision messages. |
|
Rearm Timer |
Rearms the detector 2 minutes after the last alarm. Timer disabled in the walk test mode – not applicable for the DD243 version (see section 1). |
|
WIRELESS |
|
|
Frequency (MHz) |
315 (U.S. version), 433.92, 868.95, 869.2625 or other frequencies according to local requirements. |
|
Transmission Sequence |
3 data bursts at variable intervals within 3 seconds. |
|
Encoding |
24-bit ID, over 16 million possible combinations. |
|
Total Message Length |
36 bits. |
|
Tamper Alert |
Reported when a tamper event occurs and in any subsequent message, until the tamper switch is restored. |
|
Supervision Message |
Signaling at 60 minutes interval (U.S. version), 15 minute interval (UK version) or according to local standards. |
|
MOUNTING |
|
|
Height |
1.8 - 2.4 m (6 - 8 ft). Recommended height up to 2.1 m (7 ft) |
|
Installation Options |
Surface or corner. |
|
ACCESSORIES |
|
|
BR-1 |
Surface mounted swivel bracket, adjustable 30° down and 45° left/45° right. |
|
BR-2 |
BR-1 with a corner adapter |
|
BR-3 |
BR-1 with a ceiling adapter |
|
ENVIRONMENTAL |
|
|
RFI Protection |
>20 V/m up to 1000 MHz. |
|
Operating Temperatures |
-10°C to 50°C (14°F to 122°F). |
|
Storage Temperatures |
-20°C to 60°C (-4°F to 140°F). |
|
Compliance with Standards |
Designed to meet FCC Part 15 and Directive 1999/5/EC of the European Parliament. |
|
PHYSICAL |
|
|
Size (H x W x D) |
94.5 x 63.5 x 53.0 mm (3-11/16 x 2-1/2 x 2-1/16”). |
|
Weight (with battery) |
70 g (2.5 oz). |
|
Color |
White. |
