T-Link Universal IP Alarm CommunicatorThe T-Link universal IP alarm communicator (TL300) is a valuable
addition to the T-Link family of Internet/network alarm communicators.
Capable of communicating with any control panel (including thirdparty
manufacturers) that uses the Contact ID format, the simple-to-install
TL300 saves end-users money by taking advantage of their existing IP
networks and security equipment to create fully supervised security solutions
between protected premises and central monitoring stations. This method
provides flexibility and an always-on, two-way line of communication.
The TL300 communication stream is small and requires only a limited
amount of network bandwidth. This ensures that the integrity of the
data being transferred never becomes compromised. To reduce security
risks, the module utilizes industry-leading, 128-bit AES encryption,
polling and hardware substitution protection.
How it WorksThe TL300 connects directly to the telephone output of a control panel and simulates a telephone connection, providing a TCP/IP connection that sends predefined Contact ID codes to the central monitoring station.
To ensure dependable and timely event notification, the TL300 is capable of reporting to two different receiver IP addresses—a back-up feature that allows communication to continue in the event one of the IP addresses is inaccessible. The module can also be programmed to communicate events to two different e-mail addresses. These e-mail addresses can be associated with a personal computer, pager, enabled mobile phone or PDA.
Features:
Compatible with most control panels that use the Contact ID formatInstant, always-on IP communicationWorks over local LAN/WAN network or the Internet128-bit AES encryption (NIST approved)Supports DHCP (dynamic IP addresses)Low network bandwidth requirementsCompatible with 10/100BaseT networksReports events to 2 different receiver IP addressesPolling and hardware substitution protection4 on-board programmable zone inputs and 2 programmable voltage outputs as stand-alone moduleProgrammable through the PK5500 LCD keypad or T-Link Console softwareSoftware upgrades via networkCompatibility- The TL300 is compatible with any control panel, via the Ring and Tip connection, that uses the Contact ID format and follows the Contact ID specifications of 40 ms/60 ms on/off time.
- Direct trigger inputs of the TL300 can be controlled by outputs on any control panel.
- Central station IP receiver: • Sur-Gard System III with SG-DRL3-IP line card
Specifications:
Dimensions 3.25” x 5.25”
Input Voltage 12 VDC
Current Draw 250 mA, (275 mA with PGM or PC5108)
Operating Environment 32° to 120° F
.