2-Way Wireless Indoor Siren for Alexor
The WT4901 Wireless Indoor Siren is a fully supervised wireless siren designed to work with the Alexor Wireless Panel. With its sleek and modern design, the WT4901 will fit most internal spaces and is unobtrusive to the home environment. Since Alexor is mounted in a secure (but sometimes remote) location within the home, audible indications, via Alexor's onboard siren, regarding alarm triggers or smoke/fire detection may be quieter than what the WT4901 provides. And an indoor siren provides an alert to potential danger before a person moves too far into the home. With its powerful sounder, the WT4901 will annunciate these issues from its remote location but will
not indicate the location of the control panel. The WT4901 also distinguishes between burglar and fire alarm by emitting different sounds for each and indicates entry and exit delays, trouble beeps and uses multiple door chimes.
Since the WT4901 is wireless, it can be installed in numerous locations inside the home. And because it’s wireless, installation time is quick —with fewer holes to drill— meaning mess-free installs and more installs throughout the day.
The WT4901 offers 2-Way wireless and continuously supervised communication with the Alexor Wireless Panel. The signals between the WT4901 and the panel are fully encrypted, prohibiting unauthorized interruption of communication between the two. the WT4901 is tampered with, Alexor will immediately be signaled and the appropriate transmission will instantly be transmitted to the monitoring station. Additionally, one of the other sirens (either indoor or outdoor or Alexor's onboard siren itself) installed on the system will make up for the absence of the WT4901. Up to four sirens can be installed on the Alexor Wireless Panel.
Features:
-
Siren output is 85dB
-
Siren sounds for: Alarms, Door Chime, Entry and Exit Delay Trouble Indications
-
Transmits module status including tamper, low battery and RF fault
-
Onboard test button
-
Case and wall tamper
-
Up to 4 sirens per system
Compatible with Alexor Wireless Panel Only
Specifications:
Dimensions: 3.3"× 5"× 1.1"
Weight: 7.76 oz
Output: 85dB
Battery: 4 AA batteries
Battery Life: 2 years (typical usage)
Wireless Range: 984ft/300m Nominal Open Air
Operating Environment: 32° to 122° F (0° to 50° C)
Relative Humidity: 90%, Non-condensing
