The ANN-80W annunciator is a compact, backlit, 80-character LCD fire annunciator that mimics the Fire Alarm Control Panel (FACP) display. It provides system status indicators for AC Power, Alarm, Trouble, Supervisory, and Alarm Silenced conditions. The ANN-80W and the FACP communicate over a two-wire serial interface employing the ANN-BUS communication format. Connected devices are powered, via two additional wires, by either the host FACP or a remote UL-listed, filtered power supply. ANN-80W is white.
Features:
-
Control switches for System Acknowledge, Signal Silence, Drill, and Reset.
-
Control switches can be independently enabled or disabled at the FACP.
-
Keyswitch enables/disables control switches and mechanically locks annunciator enclosure
-
Enclosure supervised for tamper.
-
Local sounder can be enabled or disabled at the FACP.
-
Displays device type identifiers, individual point alarm, trouble, supervisory, zone, and custom alpha labels.
-
Surface mount directly to wall or to single, double, or 4"square electrical box.
-
Semi-flush mount to single, double, or 4" square electrical box. Use ANN-SB80KIT for angled view mounting.
-
Can be remotely located up to 6,000 feet (1,800 m) from the panel.
-
Backlight turns off during AC loss to conserve battery power but will turn back on if an alarm condition occurs.