MS25 25 Point Intelligent Control
Discontinued - No Direct Replacement
The MS-25 is a 25-point fire alarm control panel designed to provide a cost-effective addressable solution to meet even the smallest specification. Unlike other small panels, the MS-25 is a full featured, addressable alternative…at a conventional panel price. It runs on only a single loop of standard wire, provides pin-point identification and includes maintenance alerts and auto-programming. The MS-25 supports any combination of its own HFS Detectors and Modules.
Features:
• ETL listed to ANSI/UL 864 9th Edition Standard
• Listed to UL Standard 864, Ninth edition.
• JumpStart® auto-learn feature reduces installation time and makes programming easy.
• Built-in digital communicator.
• Two programmable Style Y (Class B) notification appliance circuits (NACs).
• Selectable strobe synchronization for System Sensor®, Gentex®, Wheelock® or AMSECO devices.
• Two programmable Form-C relays and one Form-C trouble relay.
• Automatic detector sensitivity testing (NFPA 72 compliant).
• Point status eliminates calibrated smoke test requirements for NFPA 72.
• Drift compensation.
• Alarm verification per zone of detectors.
• Walk-test.
• Honeywell Fire Systems detectors and modules are codewheel addressed for faster installation time.
• Maintenance alert region.
• Uses standard wire (unshielded or twisted pair)
• Central Station reporting up to five zones.
• On Board Annunciator.
• Custom programming performed through the control panel’s built-in browser; no programming software is required.
SLC Communication:
• Single addressable SLC loop which meets NFPA Style 4 (Class B) requirements.
• 25 addressable device capacity (any combination of addressable detectors or modules).
• Compatible with Honeywell Fire Systems detectors and modules
Notification Appliance Circuits (NACS)
• Two independently programmable output circuits. Circuits can be configured for the following outputs:
– Style Y (Class B).
– Door Holder Service (cannot be used for notification appliances).
– Aux Power Source (cannot be used for notification appliances).
• Silence Inhibit and Auto-silence timer options.
• Continuous or Temporal code.
• Selectable strobe synchronization per NAC.
• Up to 2.0 A total output power, 1.0 A for auxiliary power and door holder. Each circuit can source up to the total system current 2.0 A.
Programming and Software
• Auto-learn “JumpStart®” feature for easy programming reduces installation time.
• Two programmable Form-C relay outputs.
• 5 programming zones.
• Custom programming can be performed through control
LED Indicators:
• AC Power (green)
• Fire Alarm (red)
• Supervisory (yellow)
• Alarm Silenced (yellow)
• System Trouble (yellow)
• Disabled (yellow)
