Remote Radio Receiver
Special Order
The Model AM-RRR Remote Radio Receiver is designed for use with
Linear’s access control systems. The AM-RRR functions as a remote device
that extends the radio range or supplies localized radio reception.
Three antenna types can be used with this receiver. The cabinet mounted
type F connector is for connection to the antenna. The local whip
antenna (supplied) screws directly on to the receiver’s connector. The
directional (EXA-2000) and omni-directional (EXA-1000) remote antennas
wire to the receiver’s antenna connector with type RG-59 cable.
An on-board RADIO RANGE knob allows adjustment of the receiver’s gain.
It can be set to limit the maximum radio range that the receiver can
achieve. Two indicators display the receivers performance and operation.
The two color red/green STATUS indicator lights red when the receiver
is getting DC power and turns green when access is granted to a
transmitter. The RADIO indicator lights when the receiver detects a
radio signal. It can be used for trouble shooting and verifying system
performance. Receiver test points are provided for listening to the
incoming signals.
The receiver is housed in a weather-resistant enclosure and can be
mounted indoors or outdoors. Gaskets and a weather-tight wiring strain
relief seal the unit from the elements.
Features
- Provides extended range for radio-based access control system
- Up to 500 foot radius radio coverage
- Weather-resistant housing for outside or indoor mounting
- Optional directional remote or omnidirectional remote antennas
- Integral radio gain control for adjustment of radio range
- Power supplied by access controller
- Compatible with all MegaCode transmitters
- Compatible with AM3Plus, AE1000Plus, and AE2000Plus ONLY
- RF frequency: 318 MHz
- 4.25” W x 6.25” H x 2.5” D without antenna