Honeywell Vista 20P Wireless Ready Kit

 

 

 

 

IN STOCK!

 

Kit Includes:     

(1) Ademco Vista 20P Control Panel
(1) 6160RF  Alpha Keypad with Wireless Receiver
(1) Wireless Motion Detector
(1) Wave 2 Siren
(1) Battery
(1) Jack
(1) Cord


Note: Picture shown does not reflect components in kit. Kit components are as described.


About the Control:
 

The high capacity, feature-rich VISTA-20P with up to 48 zones of protection, Internet uploading/downloading, graphic keypad support and dual partitions. VISTA-20P gives you the ability to send alarm signals and upload/download via an Internet Protocol (IP), improving the speed at which information can be delivered to and from the control panel. In addition, the VISTA-20P, used with an AlarmNet Internet or digital communicator can be installed in premises without TELCO lines with no sacrifice in functionality. The panel’s installation advantages, innovative end-user benefits and robust system capacity make the value-priced VISTA-20P an ideal choice for higher end installations.

 

Features:

 

  • IP alarm reporting and uploading/downloading capability for Internet and Intranet use via 7845i, 7845i-ENT, 7845GSMR or 7845i-GSM
  • Supports four graphic touchscreen keypads
  • Wireless keys can be programmed without using zones
  • Eight on-board hardwired zones standard (15 when Zone Doubling feature is used)
    1. – 40 hardwire expansion zones
    1. – 40 wireless expansion zones
  • Two low current on-board trigger outputs
  • 100 Event Log viewable at system keypads with time/date stamp
  • 48 system user codes assignable to either partition
  • Expandable to 48 total zones when used with hardwired and/or wireless expansion modules
  • Two independent partitions plus a common partition
    1. – Global Arming from any system keypad
    1. – Goto function to view or operate one partition from the other
    1. – Separate partition account numbers
  • 16 output devices
    1. – Relays (Model 4204 Relay Modules, or 4229 Expansion Module), and/or X-10® devices (when used with a 4300 Transformer)
  • Four installer-configurable zone types allows the installer to create custom zone types by assigning all zone attributes
  • Supports four-wire and up to 16 two-wire smokes
    1. – Works with Sentrol CleanMe™ maintenance signal
  • Multiple actions on output devices depending on system state
    1. – Turns lights off when system arms
    1. – Turns the same light on
    when system disarms
    1. – Flashes same lights when system is in alarm
  • Built-in phone line cut monitor with programmable delay and annunciation options
    1. – Display on system keypads
    1. – Trigger local sounders
    1. – Trigger system bell
  • Automatic System Load Shed
    1. – During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries.
  • Dynamic Signaling
    1. – Reduces redundant reporting to the central station when multiple reporting methods are used; i.e. digital dialer and AlarmNet radio
  • Viewable on system keypads: – Exit countdown
    1. – Time and date display*
    2. – Event log*
  • Auto keypad backlighting on entry
  • Keyswitch arming
  • Programmable macro buttons and single-button arming
  • Supports a variety of wireless remote controls for single-button operation
  • User Scheduling
    1. – Automatically activates X-10 and relays at programmed times
    2. – Latchkey reports to pagers
    3. – Auto arm/disarm
    4. – “User access” time windows
  • Supports up to four end-user numeric pagers
  • VIP Module allows system control from any touchtone phone
  • Chime by zone
    1. * Requires custom alpha keypad

 

About the Keypad:

 

The 6160RF’s integrated keypad and receiver adds full wireless capability to any VISTA control without additional wiring or sacrificing zones.

 

Features:

  • 6160 Custom Alpha Keypad
  • Built in 5881ENH unlimited zone wireless receiver
  • Compatible with 5828/5828V wireless keypads on VISTA systems*
  • Single four-wire run is all that’s required
  • It is the ideal choice where wireless keys are to be used:
    - Keys can be programmed at the panel, just as they would with the 5881ENH
  • Fully compatible with all 5800 wireless devices including bidirectional devices*
  • The 5800TM Module needed to support the 5804BD and 5804BDV is already built-in
  • Supports encrypted operation of the 5804E and 5804BDV four-button keys
  • Model: Honeywell V20P60RFPK
  • 15 Units in Stock
  • Manufactured by: Ademco/Honeywell

Ask a Question

$509.95

Add to Cart:
Your IP Address is: 3.14.70.203
Copyright © 2024 AlarmSuperStore.com. Powered by Zen Cart
Parse Time: n/a - Number of Queries: 103 - Query Time: 0