Honeywell Vista 20P Kit with 6150 Keypad, Motion and Siren

Kit Includes:

• Vista 20P Control Panel
• 6150 Keypad
• IS-335 Motion Detector
• Wave2 Siren
• Battery
• Jack and Cord

Must use an Alpha Keypad to program the Vista panel.  Use Honeywell 6160 or Honeywell 6162

About the control:

The high capacity, feature-rich VISTA-20P with up to 48 zones of protection, Internet uploading/downloading, graphic keypad support and dual partitions. VISTA-20P gives you the ability to send alarm signals and upload/download via an Internet Protocol (IP), improving the speed at which information can be delivered to and from the control panel. In addition, the VISTA-20P, used with an AlarmNet Internet or digital communicator can be installed in premises without TELCO lines with no sacrifice in functionality. The panel’s installation advantages, innovative end-user benefits and robust system capacity make the value-priced VISTA-20P an ideal choice for higher end installations.

Features:

• IP alarm reporting and uploading/downloading capability for Internet and Intranet use via 7845i, 7845i-ENT, 7845GSMR or 7845i-GSM
• Supports four graphic touchscreen keypads
• Wireless keys can be programmed without using zones
• Eight on-board hardwired zones standard (15 when Zone Doubling feature is used)
  1. – 40 hardwire expansion zones
  1. – 40 wireless expansion zones
• Two low current on-board trigger outputs
• 100 Event Log viewable at system keypads with time/date stamp
• 48 system user codes assignable to either partition
• Expandable to 48 total zones when used with hardwired and/or wireless expansion modules
• Two independent partitions plus a common partition
  1. – Global Arming from any system keypad
  1. – Goto function to view or operate one partition from the other
  1. – Separate partition account numbers
• 16 output devices
  1. – Relays (Model 4204 Relay Modules, or 4229 Expansion Module), and/or X-10® devices (when used with a 4300 Transformer)
• Four installer-configurable zone types allows the installer to create custom zone types by assigning all zone attributes
• Supports four-wire and up to 16 two-wire smokes
  1. – Works with Sentrol CleanMe™ maintenance signal
• Multiple actions on output devices depending on system state
  1. – Turns lights off when system arms
  1. – Turns the same light on
  when system disarms
  1. – Flashes same lights when system is in alarm
• Built-in phone line cut monitor with programmable delay and annunciation options
  1. – Display on system keypads
  1. – Trigger local sounders
  1. – Trigger system bell

• Automatic System Load Shed
  1. – During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries.
• Dynamic Signaling
  1. – Reduces redundant reporting to the central station when multiple reporting methods are used; i.e. digital dialer and AlarmNet radio

• Viewable on system keypads: – Exit countdown
  1. – Time and date display*
  1. – Event log*
• Auto keypad backlighting on entry
• Keyswitch arming
• Programmable macro buttons and single-button arming
• Supports a variety of wireless remote controls for single-button operation
• User Scheduling
  1. – Automatically activates X-10 and relays at programmed times
  1. – Latchkey reports to pagers
  1. – Auto arm/disarm
  1. – “User access” time windows
• Supports up to four end-user numeric pagers
• VIP Module allows system control from any touchtone phone
• Chime by zone
  1. * Requires custom alpha keypad