Kit Includes:
(1) Ademco Vista 20P Control Panel
(1) 6160 Custom Alpha Keypad
(1) PIR Motion Detector IS-3035
(1) Wave 2 Siren
(1) Battery
(1) Jack
(1) Cord
Note: Picture shown does not reflect components in kit. Kit components are as described.
About the control:
The high capacity, feature-rich VISTA-20P with up to 48 zones of protection, Internet uploading/downloading, graphic keypad support and dual partitions. VISTA-20P gives you the ability to send alarm signals and upload/download via an Internet Protocol (IP), improving the speed at which information can be delivered to and from the control panel. In addition, the VISTA-20P, used with an AlarmNet Internet or digital communicator can be installed in premises without TELCO lines with no sacrifice in functionality. The panel’s installation advantages, innovative end-user benefits and robust system capacity make the value-priced VISTA-20P an ideal choice for higher end installations.
Features
-
IP alarm reporting and uploading/downloading capability for Internet and Intranet use via 7845i, 7845i-ENT, 7845GSMR or 7845i-GSM
-
Supports four graphic touchscreen keypads
-
Wireless keys can be programmed without using zones
-
Eight on-board hardwired zones standard (15 when Zone Doubling feature is used)
-
– 40 hardwire expansion zones
-
– 40 wireless expansion zones
-
Two low current on-board trigger outputs
-
100 Event Log viewable at system keypads with time/date stamp
-
48 system user codes assignable to either partition
-
Expandable to 48 total zones when used with hardwired and/or wireless expansion modules
-
Two independent partitions plus a common partition
-
– Global Arming from any system keypad
-
– Goto function to view or operate one partition from the other
-
– Separate partition account numbers
-
16 output devices
-
– Relays (Model 4204 Relay Modules, or 4229 Expansion Module), and/or X-10® devices (when used with a 4300 Transformer)
-
Four installer-configurable zone types allows the installer to create custom zone types by assigning all zone attributes
-
Supports four-wire and up to 16 two-wire smokes
-
– Works with Sentrol CleanMe™ maintenance signal
-
Multiple actions on output devices depending on system state
-
– Turns lights off when system arms
-
– Turns the same light on
when system disarms
-
– Flashes same lights when system is in alarm
-
Built-in phone line cut monitor with programmable delay and annunciation options
-
– Display on system keypads
-
– Trigger local sounders
-
– Trigger system bell
-
Automatic System Load Shed
-
– During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries.
-
Dynamic Signaling
-
– Reduces redundant reporting to the central station when multiple reporting methods are used; i.e. digital dialer and AlarmNet radio
-
Viewable on system keypads: – Exit countdown
-
– Time and date display*
-
– Event log*
-
Auto keypad backlighting on entry
-
Keyswitch arming
-
Programmable macro buttons and single-button arming
-
Supports a variety of wireless remote controls for single-button operation
-
User Scheduling
-
– Automatically activates X-10 and relays at programmed times
-
– Latchkey reports to pagers
-
– Auto arm/disarm
-
– “User access” time windows
-
Supports up to four end-user numeric pagers
-
VIP Module allows system control from any touchtone phone
-
Chime by zone
-
* Requires custom alpha keypad