Manufacturers

More Information

Sponsors

(image for) Free shipping over $199

Bases and Accessories

(image for) System Sensor RA100Z Remote Annunciator

System Sensor RA100Z Remote Annunciator

RA-100Z remote annunciator is designed for both conventional and intelligent applications. This is a direct replacement for the discontinued RA-400Z
$46.95
(image for) Buy Now
(image for) System Sensor A77AB2 Retrofit Adapter Bracket

System Sensor A77AB2 Retrofit Adapter Bracket

The A77-AB2 allows installers to retrofit i3 Series detectors where a larger diameter detector was previously installed   Specifications: A77-AB2 Dimensions: 6.6" Diameter
$16.95
(image for) Buy Now
(image for) System Sensor B110LP Two Wire Base for 100 Series

System Sensor B110LP Two Wire Base for 100 Series

The B110LP is a 2-wire base for use with 100 Series smoke detectors Specifications: B110LP   Wiring: 2-wire Operating Voltage: 12/24 VDC nominal Alarm Current: 10-100mA (must be limited by control panel) Single Gang: Yes 3.5 inch Octagon: Yes 4 inch Octagon: Yes 4 inch Square: Yes 50 mm: No 60 mm: No 75 mm: No
$32.95
(image for) Buy Now
(image for) System Sensor B112LP 4 Wire Base

System Sensor B112LP 4 Wire Base

The B-112LP is a 4-wire base with Form A&C relay contacts, for use with 100 Series smoke detectors. Specifications: B112LP Wiring: 4-wire Operating Voltage: 24 VDC nominal Alarm Current: 14-39mA Auxiliary Contact: Form A, C Auxiliary Contact Ratings: 2.0A @ 30 VAC/DC (Form A); 0.6A @ 110 VDC, 2.0A @ 30 VDC, 1.0A @ 125 VAC, 2.0A @ 30 VAC (Form C) Single Gang:...
$63.95
(image for) Buy Now
(image for) System Sensor B114LP 4 Wire Base

System Sensor B114LP 4 Wire Base

NO STOCK, NO ETA, ON BACK ORDER The B-114LPA  is a 4-wire base with Form A&C and Form A Supervisory relay contacts, for use with 100 Series smoke detectors. Specifications: B114LP Wiring: 4-wire Operating Voltage: 120 VAC nominal Alarm Current: 75mA AC max. Auxiliary Contact: Form A, C + A Supervisory Auxiliary Contact Ratings: 2.0A @ 30 VAC/DC (Form A); 0.6A @...
$169.95
(image for) Buy Now
(image for) System Sensor B116LP 2 Wire Base

System Sensor B116LP 2 Wire Base

      NO STOCK DO NOT ORDER The B-116LP is a 2-wire base with a Form C relay contact, for use with 100 Series Smoke detectors. Specifications: B116LP Wiring: 2-wire Operating Voltage: 24 VDC nominal Alarm Current: 12-100mA (must be limited by control panel) Auxiliary Contact: Form C Auxiliary Contact Ratings: 0.6A @ 110 VDC, 2.0A @ 30 VDC, 1.0A @ 125 VAC,...
(image for) Buy Now
Your IP Address is: 18.97.14.81
Copyright © 2024 AlarmSuperStore.com. Powered by Zen Cart