Your One Stop Alarm Shop
Categories
- Ademco Honeywell->
- Alarm Controls Corp->
- Alarm Foiling Supplies
- Alarm System Kits->
- Alarm Warning Decals and Signs
- Altronix->
- ATW Mascon->
- Audio Monitoring by Louroe->
- Battery Replacement
- Boat Security Alarms->
- Carbon Monoxide Gas Detectors
- CCTV Home Security Cameras->
- Contacts for Doors and Windows->
- Corby Industries
- Dialers Voice and Cellular->
- Discontinued Alarm Parts
- Door Alarms and Chimes->
- Door Cords->
- Driveway Security Alarms->
- DSC->
- DSL Filter
- ELK Products->
- FBII->
- Fire Alarm Pull Stations
- Firelite->
- GE Security / Sentrol->
- Hold Up Devices->
- Home Audio Speakers->
- Installation Tools->
- Intercom Systems->
- Linear->
- M & S Systems by Linear->
- Macurco Aerionics->
- Napco Security->
- Nutone->
- Optex->
- Phone Jacks and Cords
- Pool and Gate Alarms->
- Relays and Timers->
- Russound->
- Secure Wireless
- Shock Detection
- Silent Knight->
- Siren Cabinets and Boxes->
- Sirens Strobes Horns Speakers->
- Smoke and Heat Detectors->
- Ademco / Honeywell
- Bosch
- BRK Electronics->
- Can Smoke Check
- DSC
- ESL Interlogix UTC
- Gentex
- Kidde (Edwards)
- Napco
- System Sensor->
- i3 Series Smoke Detectors
- i4 Series Combo CO and Smoke
- Beam Detectors
- Heat Detectors
- 100 Series
- HVAC Systems Monitoring->
- Bases and Accessories
- STI Safety Technology->
- Street Smart by Honeywell
- Surge Suppression
- System Sensor->
- Temp Humidity Sensors->
- Transformers->
- USP United Security Products->
- Vault and Safe Protection
- Visonic->
- Water Detection->
- Winland->
- Wire and Cable->
- All Products ...
Manufacturers
Information
Sponsors
Bases and Accessories
System Sensor RA100Z Remote Annunciator
RA-100Z remote annunciator is designed for both conventional and intelligent applications. This is a direct replacement for the discontinued RA-400Z
$46.95
System Sensor A77AB2 Retrofit Adapter Bracket
The A77-AB2 allows installers to retrofit i3 Series detectors where a larger diameter detector was previously installed Specifications: A77-AB2 Dimensions: 6.6" Diameter
$16.95
System Sensor B110LP Two Wire Base for 100 Series
The B110LP is a 2-wire base for use with 100 Series smoke detectors Specifications: B110LP Wiring: 2-wire Operating Voltage: 12/24 VDC nominal Alarm Current: 10-100mA (must be limited by control panel) Single Gang: Yes 3.5 inch Octagon: Yes 4 inch Octagon: Yes 4 inch Square: Yes 50 mm: No 60 mm: No 75 mm: No
$32.95
System Sensor B112LP 4 Wire Base
The B-112LP is a 4-wire base with Form A&C relay contacts, for use with 100 Series smoke detectors. Specifications: B112LP Wiring: 4-wire Operating Voltage: 24 VDC nominal Alarm Current: 14-39mA Auxiliary Contact: Form A, C Auxiliary Contact Ratings: 2.0A @ 30 VAC/DC (Form A); 0.6A @ 110 VDC, 2.0A @ 30 VDC, 1.0A @ 125 VAC, 2.0A @ 30 VAC (Form C) Single Gang:...
$63.95
System Sensor B114LP 4 Wire Base
NO STOCK, NO ETA, ON BACK ORDER The B-114LPA is a 4-wire base with Form A&C and Form A Supervisory relay contacts, for use with 100 Series smoke detectors. Specifications: B114LP Wiring: 4-wire Operating Voltage: 120 VAC nominal Alarm Current: 75mA AC max. Auxiliary Contact: Form A, C + A Supervisory Auxiliary Contact Ratings: 2.0A @ 30 VAC/DC (Form A); 0.6A @...
$169.95
System Sensor B116LP 2 Wire Base
NO STOCK DO NOT ORDER The B-116LP is a 2-wire base with a Form C relay contact, for use with 100 Series Smoke detectors. Specifications: B116LP Wiring: 2-wire Operating Voltage: 24 VDC nominal Alarm Current: 12-100mA (must be limited by control panel) Auxiliary Contact: Form C Auxiliary Contact Ratings: 0.6A @ 110 VDC, 2.0A @ 30 VDC, 1.0A @ 125 VAC,...
Your IP Address is: 18.97.9.173
Copyright © 2024 AlarmSuperStore.com. Powered by Zen Cart