Your One Stop Alarm Shop
Categories
- Ademco Honeywell->
- Alarm Controls Corp->
- Alarm Foiling Supplies
- Alarm System Kits->
- Alarm Warning Decals and Signs
- Altronix->
- ATW Mascon->
- Audio Monitoring by Louroe->
- Battery Replacement
- Boat Security Alarms->
- Carbon Monoxide Gas Detectors
- CCTV Home Security Cameras->
- Contacts for Doors and Windows->
- Corby Industries
- Dialers Voice and Cellular->
- Discontinued Alarm Parts
- Door Alarms and Chimes->
- Door Cords->
- Driveway Security Alarms->
- DSC->
- DSL Filter
- ELK Products->
- FBII->
- Fire Alarm Pull Stations
- Firelite->
- GE Security / Sentrol->
- Hold Up Devices->
- Ademco
- Amseco
- Sentrol / GE
- USP
- Home Audio Speakers->
- Installation Tools->
- Intercom Systems->
- Linear->
- M & S Systems by Linear->
- Macurco Aerionics->
- Napco Security->
- Nutone->
- Optex->
- Phone Jacks and Cords
- Pool and Gate Alarms->
- Relays and Timers->
- Russound->
- Secure Wireless
- Shock Detection
- Silent Knight->
- Siren Cabinets and Boxes->
- Sirens Strobes Horns Speakers->
- Smoke and Heat Detectors->
- STI Safety Technology->
- Street Smart by Honeywell
- Surge Suppression
- System Sensor->
- Temp Humidity Sensors->
- Transformers->
- USP United Security Products->
- Vault and Safe Protection
- Visonic->
- Water Detection->
- Winland->
- Wire and Cable->
- All Products ...
Manufacturers
Information
Sponsors
Amseco
Amseco HUS-7A Latching Hold Up Switch
Latching Hold Up Switch Special Order The HUS-7A is a single button, latching hold-up switch designed to provide a rapid signal to alarm systems. It is activated by pressing down the single button switch. A status window indicates the condition of the switch: RED (alarmed), BLUE (armed). A U-shaped key is supplied to reset the HUS-7A. The hold-up switch sends a signal to a dedicated 24 hour hold-up circuit of a...
$17.95
Amseco HUSD-15BL Dual Button Hold Up Switch
Dual Button Hold Up Switch The HUSD-15B Series is a Form C (SPDT), dual button hold-up switch that is designed to generate an alarm condition only when both buttons are pressed simultaneously, thus preventing accidental triggering. The housing of this series is specially designed with a status window, red (alarm) and blue (armed), to verify the switch condition. The housing mounting screw is concealed to provide...
$18.95
Amseco HUSD-15BM Dual Button Hold Up Switch
Dual Button Hold Up Switch The HUSD-15B Series is a Form C (SPDT), dual button hold-up switch that is designed to generate an alarm condition only when both buttons are pressed simultaneously, thus preventing accidental triggering. The housing of this series is specially designed with a status window, red (alarm) and blue (armed), to verify the switch condition. The housing mounting screw is concealed to...
$18.95
Amseco HUSK-20 Latching Hold Up Switch
Latching Hold Up Switch Direct Replacement for Amseco HUSK-10 The HUSK-20 is a mechanical hold-up switch designed for silent operation. It is activated by using one finger to press down on the switch. When activated, the switch mechanism locks, insuring an immediate alarm signal. A status window designed on top of the hold-up switch indicates its condition: RED (alarmed) and BLUE (armed). To reset the HUSK-20, use...
$26.95
Amseco Potter HUB-M Universal Hold Up Button
Universal Hold Up Button Correct part number for 2020130 Screw terminals One DPDT contact All in one switch. Momentary or latching. UL and ULC Listed Dimensions: 2" W x 2 5/16" L x 1" H Weight: 1.5 oz. Switch Rating: 3 Amps at 28V DC/AC, .05 Amp at 125V DC Resistive Enclosure: ABS Plastic Temperature Range: 32°F to...
$29.95
Your IP Address is: 18.97.9.173
Copyright © 2024 AlarmSuperStore.com. Powered by Zen Cart