Call Toll Free 1-877-781-7178
or 1-732-583-7878




PayPal Logo
PayPal Acceptance Mark

Have you seen ...
Free shipping over $199
Shopping Cart:
now in your cart 0 items
Your cart is empty.
Manufacturers
Sponsors
Free shipping over $199


Russound X225 Two-Channel Amplifier (150/225W)






Two-Channel Amplifier (150/225W)
Discontinued - No Direct Replacement

The Russound X225 is a 2-channel dual source power amplifier with auto-source switching. It features Primary and Secondary audio line inputs with a loop out to another zone, receiver, or device from the secondary source. A speaker-level input can be connected and assigned as either the primary or secondary source. This amplifier can be used for power upgrades in zones for large speaker selector or volume control systems.


The X225 is rated at 225 watts per channel into 4 ohms, and 150 watts into 8 ohms. Each amplifier output channel incorporates robust protection circuitry for reliability and safety under extreme circumstances. With the Stereo/Bridge Mono switch in the Bridge Mono position, both amplifier channels are combined for a higher powered mono output. In Bridge mode the X225 is rated at 470 watts of power into a single 8 ohm load. The 12V Trigger In/Out allows the amplifier to be activated by other devices or to activate other electronics via a 3.5 mm mini phone plug cable, with 100mA current capability.


Features:

  • Volume and balance allows for control at the component instead of volume control or keypad
  • A/B speaker switching easily toggles output between two sets of speakers or zones
  • Signal sensing inputs automatic turn on/off and switching to second source
  • Bridgeable - delivers higher output for use with a subwoofer or outdoor speakers

Specs:

Shipping Dimensions22.0" (W) x 7.0" (H) x 19.0" (D)
(55.9 x 17.8 x 48.3 cm)
Shipping Weight40.3 lbs (18.3 kg)
Crosstalk> 70dB @ 1 kHz, ref. to rated power @ 8 ohms
Frequency Response20Hz to 20kHz +0.0dB/- 0.5dB @ 8 ohms, 1W
Input Sensitivity500mV for 150W at 8 ohms
Power OutputContinuous Stereo:
150W per channel at 8 ohms
225W per channel at 4 ohms

Bridged Mono:
470W bridged mono at 8 ohms
Power Requirement(s)120VAC 60Hz 10A
230VAC 50Hz 5.2A
IEC 320 type connector with 3 terminal detachable power cord.
Signal to Noise Ratio>93dB A-weighted




Add to Cart:
  

  • Model: Russound X225
  • 0 Units in Stock
  • Manufactured by: Russound





Parse Time: 0.201 - Number of Queries: 229 - Query Time: 0.096439949615479